1. Home
  2. > Blog
  3. >  Whether The Working Principle Of Disc Crusher Is Affected By Material Hardness

Whether The Working Principle Of Disc Crusher Is Affected By Material Hardness

Last Update:2020-05-02 10:14:52

The rotary disc crusher is a crushing equipment which can not be separated from the modern production at present. The advantages of this equipment are huge. Compared with some traditional crushing equipment, the overall operation performance of this equipment is very stable, and the proportion of crushing is very large, so the larger particles are crushed without any impact. However, in the actual production process, the hardness of the material has a certain impact on the production efficiency of the equipment. So is the disc crusher affected by material hardness? How much is the impact?

In fact, many operators will think that in a certain period of time, if the input of materials is more, then the amount of crushing will be more, and the production efficiency will be increased a lot, but this is not the case. Because the working principle of the rotating disc crusher is very complex, and the properties of the crushed materials of different types of equipment have certain requirements. Once the hardness of the materials exceeds the required range, it is likely to have a great impact on the production and even damage the rotating disc crusher equipment.

During the operation of the disc crusher, in addition to putting materials into the crushing chamber according to the requirements, do not put other non crushing materials into the crushing chamber, otherwise it will cause great damage to the crushing chamber and seriously affect the normal production efficiency. In the production process of the disc crusher, if there are objects other than materials entering, it is necessary to shut down the crusher in time for handling. In addition, it is also necessary to open the overload protection system of the equipment in time, so as to ensure the small damage of the equipment.

In fact, the working principle of the rotating disc crusher is relatively complex, and there are high requirements for materials in the process of equipment operation. Generally speaking, if the humidity of the material is too high or there is too much water in the material, it may lead to the adhesion of the crushing chamber in the production process. The material is stuck in the equipment and cannot be discharged in time. The more the material is accumulated, the blockage of the disc crusher will be caused and the normal production will be greatly affected.

Rotary disc crusher is a common kind of crusher, which has been widely used in production. However, in the specific production process, all operators should pay attention to the operation and daily maintenance of the equipment, select the appropriate materials according to the type and configuration of the equipment, and the non materials must be far away from the disc crusher, so as to ensure the efficient operation of the equipment and reduce the failure rate.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now