1. Home
  2. > Blog
  3. >  What If The Ventilation Effect Of Kaolin Mill Is Not Good

What If The Ventilation Effect Of Kaolin Mill Is Not Good

Last Update:2020-05-04 22:04:51

If the ventilation effect of kaolin mill is not good, the temperature inside the mill will rise. If the outlet temperature of the kaolin mill is too high, the quality of the finished product will be greatly affected. In the actual production, it is necessary to strengthen the internal ventilation of the kaolin mill, improve the sealing discharge device at the tail of Raymond mill, ensure good sealing effect, and minimize the external air entering the ventilation system of the mill through the sealing equipment. Users need to pay attention to the fact that if the temperature of the kaolin mill is always very high, it needs to be stopped for inspection and treatment. When it comes to the ventilation device of the kaolin mill, we have to mention the fan of the mill. If the ventilation pipe of the fan is blocked and the ventilation is not smooth, it will also cause the normal operation of the mill. There are many reasons for the blockage of the pipe. Sometimes we put too many raw materials, or the water content in the raw materials is too high, which leads to the agglomeration or uneven crushing of some raw materials In case of any condition, the pipeline conveying materials will be blocked. When checking whether the equipment is aging, the pipeline will be blocked. You can listen to the sound of equipment operation. If the sound is relatively low, it is normal. If there is any abnormal noise in the sound, or the operation sound becomes loud, it means that the equipment operation is abnormal and needs to be stopped for inspection. In addition, the speed of feeding is too fast, which causes too high load on the machinery and block. It may also be because the discharge pipe is not smooth, which causes the incoming raw materials to pile up in the equipment and fail to come out, which may also cause fan operation failure. At this time, we need to observe the ammeter pointer on the instrument. If the reading exceeds the rated current, it means that the motor is in overload operation. If it is overloaded for a long time, it will undoubtedly burn the motor. At this time, we need to close the feeding door, or we can control the feeding amount of the equipment by changing the way of the inlet and outlet, or by using the feeder System. In addition, as mentioned above, frequency conversion control system can be used to control the amount of incoming material, the amount of outgoing material, etc. to ensure the output and quality of finished products. For more details, please pay attention to our official account of WeChat.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

Related New Products

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now