1. Home
  2. > Blog
  3. >  What Details Should Be Paid Attention To In The Maintenance Of Mine Waste Rock Crusher

What Details Should Be Paid Attention To In The Maintenance Of Mine Waste Rock Crusher

Last Update:2020-05-13 12:07:17

There are many kinds of crushers, for many users, although the current mining gangue crusher production efficiency is very high, but in addition to the production, due to the failure to do a good job in the maintenance of the equipment, resulting in a great impact on the service life of the equipment, and there may be a variety of production failures, or even production accidents. So what details should be paid attention to in the maintenance of gangue crusher?

First of all, there are many parts of the gangue crusher, among which the bearing is a key part, which bears all the loads of the equipment, so it is very important for the normal operation of the equipment to ensure good enough lubrication, which directly affects its service life and working efficiency. This requires that when the mining gangue crusher is working, it needs to add lubricating oil in time, at the same time, it needs to ensure that the clean and clean quality of lubrication is good, and it has enough high sealing property.

There are many vulnerable parts of the gangue crusher, which need to be paid great attention to after the new installation of the wheel, because it is a kind of easily loose parts, in the process of equipment operation and rest, it is necessary to carry out a comprehensive inspection in time, if it is found loose, it is necessary to tighten it in time to ensure the smooth progress of production. At the same time, before and after the operation of the gangue crusher, all parts and connections of the equipment shall be comprehensively inspected to ensure that there is no fault.

The wearing parts of the gangue crusher are easy to wear in different degrees during long-term operation, so all operators should pay attention to the wearing conditions of the wearing parts at any time when the equipment is working. If there is a large degree of wear, the wearing parts should be replaced in time to ensure their normal operation. In addition, during the operation of the waste rock crusher, some users will find that the bearing of the equipment is overheated. At this time, it is necessary to stop the machine in time for comprehensive inspection and maintenance, and then start the machine after troubleshooting.

In the process of operation of gangue crusher, various production accidents are common, but this can be avoided completely. Take the underframe of the movable device for example, the plane movement of the underframe is very strict, and the bearing cannot move on the underframe. It is hoped that all operators should pay attention to these common basic knowledge, do a good job in the maintenance of the mining gangue crusher, but failure, to ensure the smooth progress of production.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us