1. Home
  2. > Blog
  3. >  What Are The Preparations Before The Start Of Large Stone Crushing Machinery And Equipment

What Are The Preparations Before The Start Of Large Stone Crushing Machinery And Equipment

Last Update:2020-05-13 03:24:42

Crushing equipment is widely used in many production at present. As one of them, the application advantage of large-scale stone crushing equipment is huge. However, for many users, in the process of production, due to the incorrect operation of the relevant steps when the equipment is started, it often leads to the failure of production equipment or the occurrence of safety production accidents. So what are the preparations before the stone crushing machine starts? Let's learn about them.

A lot of work needs to be paid attention to before the start of stone crushing machine. The first thing we need to do is to check whether the parts of the equipment are worn or not. Once the wear is serious, we need to replace the new parts in time. At the same time, pay attention to check the lubrication condition of the bearing, add the lubricating oil in time, and add the lubricating grease at the connection of the bearing bracket plate in time, so as to ensure the efficient operation of the production line and the long service life of the large stone crushing equipment.

Before the start of large stone crushing equipment, it is also necessary to check whether the fasteners and connections of the equipment are in a tight state, and tighten the bolts in a timely manner in case of looseness. Once it is found that the protective device is damaged or unsafe, it is necessary to find out the cause in time to eliminate. Before the official start-up of the equipment, it is necessary to check whether there is any residual debris or crushed ore in the crushing chamber of the stone crushing equipment, and if there is any, remove it in time.

When the stone crushing machine is ready to start, it is necessary to check whether the transmission part of the equipment is normal, so as to start normally. It should be noted that the crushing equipment must be carried out without load when it is in operation, and the material block cannot be carried. When the large stone crushing equipment is started, it is found that the equipment has abnormal conditions, it is necessary to stop in time for comprehensive inspection of the equipment, and it can be started again after troubleshooting.

As for the preparation work before the start of large stone crushing equipment, it has been described in detail above. It is hoped that all operators will do these preparations well before production, and can start the machine for operation only after confirming that everything is safe and correct. At ordinary times, when the stone crushing equipment does not work, we should pay attention to the maintenance of the equipment, so as to ensure the efficient operation of the production line and the long service life of the equipment.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now