1. Home
  2. > Blog
  3. >  The Reason And Solution For The Failure Of Bentonite Mill

The Reason And Solution For The Failure Of Bentonite Mill

Last Update:2020-05-06 01:45:04

As a common equipment in bentonite grinding production, bentonite grinder can be seen in every bentonite processing factory. However, in the working process of bentonite grinder, some problems such as this or that will inevitably occur, in which no powder is a common fault. So, if the bentonite mill does not produce powder, how to solve it? First of all, users should be reminded that once the bentonite pulverizer fails to discharge the powder, it is mostly due to two reasons. First, the powder locking device is not adjusted properly in time, and the seal is not tight and air leakage. In this way, the powder will be inverted, reducing the powder rate and no powder. Second, the blade wear is too much, it will also cause less powder. The distance between the blade and the air duct is large, and the accumulated material under the blade cannot be scooped up and cannot be grinded again, and the production will be reduced. If this happens to the bentonite mill, first check the sealing performance of the powder lock. If there is air leakage, try to repair it and seal it well. You can use electric welding or cold sealant. If the problem of the blade is too much wear, it needs to be replaced with a new blade. For more details, please pay attention to our official account of WeChat.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now