1. Home
  2. > Blog
  3. >  The Manufacturer Of High Fine Grinding Machine Tells You The Reason For The Reduction Of Equipment Capacity

The Manufacturer Of High Fine Grinding Machine Tells You The Reason For The Reduction Of Equipment Capacity

Last Update:2020-05-13 15:57:52

The high fineness grinder is a type of Raymond mill. When the user purchases the high fineness grinder, most of them pay attention to the production capacity of the equipment, and the equipment with high productivity can complete the normal work progress. However, there is a response from the user that the output of the high fineness grinder is not up to the standard in the use process. What causes this? Below is a small compilation to analyze and analyze the reasons for the reduction of production. 1. When the Raymond mill is working, even if the same stone is used with the same equipment, maybe the effect of two times of grinding before and after will be different. And different materials have different hardness, the greater the hardness of materials, the greater the wear of equipment. Therefore, when the output of Raymond machine is not up to the standard, it is necessary to check the grinding materials first. 2. The power of Raymond mill motor will also affect the production capacity. If the motor power is too large or too small, the Raymond machine will not be able to grind the materials evenly when it is working, which will lead to the increase of returned materials, thus affecting the production capacity of the equipment. Therefore, when the motor is equipped, it must be equipped according to the model of Raymond machine. 3. The humidity and viscosity of materials are also factors that affect the output of high-precision pulverizer, so if the humidity or viscosity of the materials to be ground is too high, it will cause the blockage of the grinding materials, which will cause the materials can not be discharged normally, and affect the normal production operation, so the output of Raymond machine will also be affected. 4. And the granularity of the feed. Because the output of Raymond mill may be reduced if the grinding material is too large or too small, the suitable material size should be selected when grinding the material, and the material should be fed according to the uniform feeding speed. www.zzsgzj.cn

4. And the granularity of the feed. Because the output of Raymond mill may be reduced if the grinding material is too large or too small, the suitable material size should be selected when grinding the material, and the material should be fed according to the uniform feeding speed.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us