1. Home
  2. > Blog
  3. >  Technological Process Of Impact Crusher In Guangdong Limestone Production Line

Technological Process Of Impact Crusher In Guangdong Limestone Production Line

Last Update:2020-05-07 15:20:52

Shaoguan, Guangdong Province, has been developing well in recent years. The development of the corresponding parts of Yunfu impact crusher and other parts of Guangdong impact crusher is getting better and better. More and more manufacturers and more complete services are provided. Whether it's pre-sales service or after-sales service, the level is getting higher and higher.

In Limestone production line, impact crusher is generally used as the second stage crushing machine. In addition to the impact crusher, customers can also choose the jaw crusher as a first-class crusher. In the whole production line, in addition to crushing equipment, screening equipment and conveying equipment shall also be equipped. Customers according to their different needs, reasonable configuration.

The impact crusher has a novel design principle. The equipment adopts the new concept crushing technology, which can meet the crushing of different material specifications and fully meet the requirements of the new process of "more crushing and less grinding". The principle of "beating iron with stone" is not only high crushing ratio, but also low power consumption per unit. A large number of practices have proved that the impact crusher has a good application prospect in the field of mineral processing.

The crushing process of the impact crusher in the limestone production line is as follows: the stone after primary crushing enters the impact crusher cavity through the conveyor belt. Under the action of high-speed centrifugal force, the material directly falls into the high-speed rotating turntable from the upper part of the machine; under the action of high-speed centrifugal force, it collides with another part of flying rocks around the turntable in the form of umbrella to produce high-speed collision and high-density crushing. After hitting each other, the stones will form eddy current movement between the turntable and the shell, which will cause many times of hitting, friction and crushing each other, and will be discharged directly from the lower part. The process forms closed circuit and multiple circulation, which is controlled by screening equipment to make the materials reach the required granularity.


If you are interested in our products, or have any questions for us, you can click the button below

Contact Us