1. Home
  2. > Blog
  3. >  Shanghai Shibang Crusher Factory Teaches You How To Ensure Efficient Production Of Equipment

Shanghai Shibang Crusher Factory Teaches You How To Ensure Efficient Production Of Equipment

Last Update:2020-05-01 02:11:06

Among many Shanghai Shibang crusher models, the cone breaking random crusher is more commonly used, which is also favored by the majority of users in the daily crushing production. The reason why we like it is that the cone crusher has stable working performance and efficient production efficiency, but the equipment always has an old one, and the production efficiency may slow down. Next, let Shanghai Shibang crusher factory teach you how to ensure the stability and efficiency of the equipment.

Start from the start of Shanghai Shibang crusher, and remember that no matter what the model of Shanghai Shibang crusher is, before the crusher starts, first check whether there are impurities or residual materials in the crushing chamber, check whether the size of the outlet meets the size requirements, check whether the spring safety device is normal, check the oil volume and oil temperature in the oil tank, and check the discharge Whether the water condition is normal, etc. After checking all the devices mentioned above, the crusher can be started. Only after checking, can the crusher run smoothly.

After the inspection, the oil pump of Shanghai Shibang crusher is opened, mainly to control the oil pressure within the required range. Generally speaking, the oil pressure of crusher is Zero point eight - One point five Kg / cm2, if the oil pressure is found to be too high, it should be adjusted in time, otherwise an accident will occur. In addition, pay attention to the water pressure, ensure that the water pressure is lower than the oil pressure, and avoid water infiltration into the oil. After normal operation of oil pump for 3-5 minutes, start the crusher equipment. Do not put materials into the machine immediately after start-up. Allow the machine to idle for 1-2 minutes first, and then start up for production after normal operation. Shanghai Shibang crusher factory said: don't think these steps are irrelevant or redundant. Simple parts can not only ensure the safety of production, but also ensure the stability and efficiency of equipment, so we must pay attention to them.

After opening, the material can be fed after idling smoothly. The main purpose of feeding is to pay attention to the properties such as material humidity, material hardness, material viscosity, etc., so as to ensure that it is within the crushing range of Shanghai Shibang crusher. Of course, if it is beyond this range, it will definitely lead to some equipment failure or more serious safety consequences. There is also a feeding method is also very important, from the distribution plate, let the material evenly into the crushing chamber, do not give too much material, to avoid the overload of the machine. Shanghai Shibang crusher factory said: feeding is not simply pouring materials into the equipment. If the feeding steps are not done well, it may lead to serious wear and tear of the equipment, which can not guarantee the high efficiency of the equipment, but also directly affect the uniformity of the finished products. It is recommended that the user follow the correct procedure for feeding.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now