1. Home
  2. > Blog
  3. >  Practical Application Of Pe400x600 Jawbone

Practical Application Of Pe400x600 Jawbone

Last Update:2020-05-03 21:07:17

Pe400 × 600 jaw crusher is one of the most widely used crushers in the current production. Compared with the traditional crusher, 400 * 600 jaw crusher can carry out coarse crushing and medium crushing according to the production demand, so the application of 400 * 600 jaw crusher also needs to be selected and adjusted according to the actual production output and product repair.

The 400 * 600 jaw crusher can be used in many industries, such as in the process of cement industry, a large number of materials (limestone, etc.) can be dried and ground to improve its efficiency, and before easy and simple materials, it can be transported and stored. 400 * 600 jaw crusher has high overall strength, convenient use, low maintenance rate, adjustable product specification, high efficiency and good safety performance. The strength of wear-resistant parts of crusher is high, and the one-time investment of equipment is effective. Compared with the cone crusher, the 400 * 600 jaw crusher has less investment, less finished rubble and low production cost; compared with the hammer crusher with long time, high efficiency and small investment, it has advantages; compared with the hammer crusher, the 400 * 600 jaw crusher has larger crushing ratio and can better utilize the high-speed impact energy of the whole rotor.

However, because the plate hammer of pe400 × 600 jaw crusher can easily shuttle, its application in hard material crushing is limited. Pe400 × 600 jaw crusher is usually used for coarse crushing, medium crushing or fine crushing of limestone, coal, calcium carbide, quartz, dolomite, pyrite, gypsum and chemical raw materials, construction waste, such as hard brittle materials, pe400 × 600 jaw crusher has Irreplaceable role.

For 400 * 600 jaw broken feeding, the material is poured into the crushing chamber containing the jaw teeth from the top inlet. The broken jaw teeth of 400 * 600 push the material against the chamber wall with great force and break it into smaller stones. It is an eccentric shaft that supports the movement of the jaw teeth. This shaft runs through the frame of the fuselage. The eccentric movement is usually generated by the flywheel fixed at both ends of the shaft. The flywheel and the eccentric support bearing often use spherical roller bearings. The working environment of the bearing needs to bear abrasive sewage and high temperature, and there is also a huge pressure from the operation of the crushing bin. Nevertheless, the 400 * 600 jaw breaking still needs to be very reliable Work, this is a key link to ensure production efficiency.


If you are interested in our products, or have any questions for us, you can click the button below

Contact Us