1. Home
  2. > Blog
  3. >  New Type Cf Impact Crusher For Stone Processing

New Type Cf Impact Crusher For Stone Processing

Last Update:2020-05-01 16:21:53

The impact crusher uses the principle of impact to crush materials, so its striking parts, hammerheads, plate hammers, impact plates, etc. are vulnerable parts, which wear very fast in the operation process. But this kind of defect limits the application scope of the impact crusher for a long time. Because of its characteristics, it can only be used for crushing medium hard materials. With the application of some new wear-resistant materials, this limitation has been broken, which makes the new type of CF counterattack widely spread.

Among them, cf250 impact crusher is a crushing equipment that uses impact force to crush materials. When the machine is running, its rotor rotates at high speed due to the drive of the motor. When the materials enter into the plate hammer action area, they collide with the plate hammer on the rotor to crush, and then they are thrown to the impact device to crush again, and then bounce back from the impact lining plate to the plate hammer action area to crush again. This process is repeated In the second step, the material enters the first, second and third reaction chambers from large to small and is broken repeatedly until the material is broken to the required particle size and discharged from the discharge port.

When the stone falls directly into the high-speed rotating turntable through the upper part of the machine, under the action of high-speed centrifugal force, it will collide with the flying stone around the turntable in the form of umbrella and produce high-speed impact and high-density crushing. After the stone strikes each other, it will form eddy current movement between the turntable and the shell, which will cause multiple strikes, friction and crushing, and will be discharged directly from the lower part And form a closed circuit for multiple cycles, and the screening equipment controls to achieve the required particle size.

2. Good particle size of materials: due to the impact, the crushed materials are often broken along their more vulnerable layers, and this selective crushing method has a high probability of making their particles in cube shape, so the percentage content of needle and flake of materials in impact crusher can be lower than 10%, while that of other crusher products can be higher than 15%. Therefore, the impact crusher is usually used as the final crushing equipment to produce concrete aggregate when cube particles are needed.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now