1. Home
  2. > Blog
  3. >  How To Solve The Problem Of Heat Dissipation Of Bearing In Bauxite Mill

How To Solve The Problem Of Heat Dissipation Of Bearing In Bauxite Mill

Last Update:2020-05-12 19:40:29

In the production process of bauxite mill, when the bearing temperature is too high and the heat dissipation is not good, various problems will appear in the equipment. This phenomenon has seriously affected the efficient operation and production power of the equipment. So, how can we solve the problem of heat dissipation of bauxite mill bearings? Here is a brief introduction. 1、 When the bearing of bauxite mill is impacted, it will cause the rotor of the motor and the rotor of the equipment to be not concentric, which makes the shaft bear the impact of the load, and then leads to the phenomenon of overheating of the bearing temperature. When this phenomenon occurs, we should stop the machine in time and remove the fault, for example, adjust the position of the bearing to avoid the phenomenon of misalignment or eccentric wear. 2、 Too much or too little lubricating oil in the bearing of bauxite mill will cause poor heat dissipation of the bearing. When there is too much lubricating oil, the heat dissipation performance of the bearing will be poor, and then the heat can not be dissipated in time. Too little will lead to the bearing can not be fully lubricated. When the equipment is running, the bearing will become hot. Therefore, the addition of lubricating oil should be timed and quantitative to avoid too much or too little, which will be detrimental to the heat dissipation of the bearing. 3、 When the bearing and shaft of bauxite mill are too tight or loose, the poor heat dissipation of the bearing will also be caused. At the same time, the tightness between the bearing and the bearing seat will lead to the aggravation of the wear. If it is loose, it will cause the bearing to overheat. Once this happens, we should stop the machine immediately and dismantle the bearing, then adjust the tightness of the bearing and the bearing block, and assemble according to the requirements. 4、 Bearing is a fragile part of bauxite mill. During the production process of the equipment, attention shall be paid to whether there is noise at the bearing part. If there is any abnormality, it shall be handled in time to avoid the metal substances from entering the main machine. In case of inadvertent access, the machine shall be shut down in time for inspection and cleaned before normal operation.


If you are interested in our products, or have any questions for us, you can click the button below

Contact Us


After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now