1. Home
  2. > Blog
  3. >  Does The Technical Parameters Of The Crusher Affect The Power Of The Crusher

Does The Technical Parameters Of The Crusher Affect The Power Of The Crusher

Last Update:2020-05-12 07:02:09

In the production process, it is better to choose a good crusher and a crusher suitable for our own enterprise. In fact, when we purchase the crusher, we usually consider the power of the crusher with reference to the technical parameters of the crusher. Many crusher manufacturers will also show some important functions through the parameters of the crusher. Therefore, when we purchase the crusher, the technology on the crusher is better The technical parameters can be referred to. What else should we look at besides parameters?

One Hardness of materials: the crusher has its own range of applicable materials in the production process, which mainly depends on the hardness of materials. Too hard materials will speed up the wear of the crusher, and it will be difficult to operate, not to mention the slow speed. Moreover, the power of the crusher is also very low, which will be reflected in the technical parameters of the crusher. You need to pay attention to the hardness of materials according to your own To choose a crusher, to ensure that the equipment will not overload work, nor waste.

2. Humidity of materials: generally, the humidity of materials will also be reflected in the technical parameters of the crusher, because not all the crushers are suitable for the humidity of all materials. The more materials containing moisture, the more easily the materials adhere to the inside of the crusher, and the blockage of the transmission process will also be caused. This also requires the operator to adjust the humidity of the material with reference to the technical parameters of the crusher.

3. Material composition: Generally speaking, the simpler the material composition, the lower the requirements for the crusher. The more the material composition, the lower the power of the crusher. Some parameters of the crusher can also be seen for the range of use of the material composition. It is easier for the fine powder in the material to adhere to the transport and affect the transport. Therefore, the next time the crusher is used, it must remember to clean up the residual substances in the crusher first, so as to improve the working efficiency of the crusher.

4. The viscosity of the material and the viscosity of the material are very important. The composition of the material and the humidity of the material will cause adhesion, but this requires a certain process. If the viscosity of the material is not directly affected, it is directly adhered. There are corresponding parameters in the manual or on the equipment of the crusher. These parameters of the crusher can show the required viscosity of the material and control the material according to the requirements Material viscosity, otherwise the equipment can not work normally, do not talk about the interests of the enterprise.

In fact, how to operate the stone crusher and how to improve the power of the stone crusher are all questions of a university. It needs to pay attention to the technical parameters of the stone crusher from the beginning of the buyer, the parameter indexes in the manual of the stone crusher, etc., and the operator must strictly follow the hardness, humidity, composition and viscosity of the materials required by the stone crusher to improve the production efficiency.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now