1. Home
  2. > Blog
  3. >  Application Of Impact Breaking Equipment In Sand Production Line

Application Of Impact Breaking Equipment In Sand Production Line

Last Update:2020-05-09 00:11:40

In the production line, the materials are crushed by the jaw crusher, then to the impact crusher, and finally reach the needs of customers after being broken again. It is learned from the manufacturer of impact crusher that the impact crusher is a kind of crusher using impact energy. In order to ensure that the impact crusher can run better and continuously in the sand production line, and extend the service life of the impact crusher, the user should maintain the impact crusher regularly.

After the equipment is put into operation, a comprehensive inspection shall be carried out for counterattack at the end of each shift. After weekly operation, conduct a comprehensive inspection on the motor and lubrication that break back. The inspection contents include the fastening of fixed parts, belt drive, bearing seal, impact lining plate and wear of lining plate for full positioning inspection, and establish regular maintenance and replacement system in combination with maintenance cycle. The operator shall have the corresponding technical level to ensure that the maintenance and repair of the equipment are carried out correctly.

In the process of using the equipment, we often encounter the problem of adjusting the gap between the rotor of the impact crusher and the impact lining plate. When the rotor of the impact crusher is in operation, the gap between the rotor and the impact lining plate cannot be adjusted. If the block of material stays between the reaction plate and the shell, the operator should slightly lift the reaction frame between the readjustment gap, so that the block feeding will become loose and the reaction frame is easy to adjust.

When the equipment is in operation for a period of time, the vulnerable parts of the impact crusher shall be replaced. When replacing the vulnerable parts of the impact crusher, first open them and put them on the rack, first remove the connecting bolts between the latter and the middle box, then screw them to the hexagon part of the turnover device with a wrench, and then replace the vulnerable parts after the upper rack is opened. When the impact hammer is worn to a certain extent, it shall be adjusted or replaced in time to avoid damage to fasteners and other parts.


If you are interested in our products, or have any questions for us, you can click the button below

Contact Us


After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now