1. Home
  2. > Blog
  3. >  Analysis On The General Knowledge Of Daily Maintenance Of Hunan Fine Jaw Crusher

Analysis On The General Knowledge Of Daily Maintenance Of Hunan Fine Jaw Crusher

Last Update:2020-05-05 09:05:08

After purchasing the jaw crusher, many users are not familiar with the use and maintenance knowledge of the equipment, resulting in a variety of problems and failures in production, which has a huge impact on the normal operation of the jaw crusher production line. Once you don't know the maintenance knowledge of the equipment, it will bring unnecessary troubles and seriously affect the production efficiency of Hunan jaw crusher. So for this kind of common crushing equipment, how to maintain it at ordinary times?

Once Hunan jaw crusher is in normal operation, the material can be put into operation. When feeding, it is necessary to ensure that the materials are given evenly and not excessively, and at the same time, it is not allowed to add materials unilaterally, so as to prevent the unilateral load of the fine jaw crusher from increasing too much and damaging the equipment. Once the feeding is too much, it will easily lead to the blockage of the conveying pipeline of the fine jaw crusher, which will greatly affect the production efficiency of the production line, which must be paid attention to.

Under the normal operation of the fine jaw crusher, the temperature of the bearing should be observed in time. Generally speaking, the temperature of the bearing should not exceed 70 ℃, and the temperature difference should not be higher than 35 ℃. Once it is found that the temperature is too high, it is necessary to stop the vehicle for inspection and repair in time. In addition, when using the fine jaw crusher lubricating oil, we should also ensure the quality of the lubricating oil, so that the friction and damage of the parts of Hunan jaw crusher can be reduced and the service life of the equipment can be extended.

The oil used in Hunan jaw crusher should be clean and high quality, and it should be changed irregularly. Before the fine jaw crusher starts to operate, the lubricating oil needs to be injected into the middle of the thrust plate and the thrust plate support, so as to reduce the friction of the equipment during production and ensure the good operation environment of the equipment. At the same time, when the fine jaw crusher works, pay attention to listening. When hearing the abnormal sound, it is necessary to stop the crusher in time for maintenance. After the fault is rejected, it will be started again for operation.

For the fine broken jaw crusher, it is not enough to know its basic operation rules. In the process of production, we need to know more about the maintenance of the equipment. This has been described in detail above. I hope that all operators can pay enough attention to the maintenance knowledge of the jaw crusher, pay attention to regular maintenance at regular intervals at ordinary times, and remove the faults in time if found, so as to ensure the normal operation of the production line of Hunan jaw crusher.

NEED A QUESTIONS?

If you are interested in our products, or have any questions for us, you can click the button below

Contact Us

LOCATION

After long-term technical research and international exchanges, the quality and technical content of Caesar's products have reached the first-class level in the world, and have been widely recognized and praised in the international market; the products are exported to more than 160 countries, such as the United States, Russia, etc

Get Price Now